CARBURETOR ACCESSORIES

KRC-1029: Carburetor Cover Assembly

KRC original aluminum carburetor cover kits quickly and efficiently cover your carburetor. Water proof and vibration 1/4"-20 Speed Nut is designed to lock onto cover with "O-Ring" seal, eliminating misplaced air cleaner fasteners.

KRC-1030: Carburetor Cover Assembly

KRC original aluminum carburetor cover kits quickly and efficiently cover your carburetor. Water proof and vibration 5/16-18 Speed Nut is designed to lock onto cover with "O-Ring" seal, eliminating misplaced air cleaner fasteners.

KRC-1031: 5-1/8" Carburetor Cover

KRC original aluminum carburetor cover quickly and efficiently covers your carburetor. 

KRC-1032: Dominator Carburetor Cover

KRC original aluminum carburetor cover quickly and efficiently covers your carburetor.

KRC-1033: Speed Nut Assembly Kit

1/4"-20 Speed Nut for standard air cleaner.

Water proof and vibration speed nut is designed to lock onto cover with "O-Ring" seal, eliminating misplaced air cleaner fasteners.

KRC-1034: Speed Nut Assembly

5/16"-18 Speed Nut for standard air cleaner.

Water proof and vibration speed nut is designed to lock onto cover with "O-Ring" seal, eliminating misplaced air cleaner fasteners.

KRC-1035: Dominator Assembly

KRC original aluminum carburetor cover kits quickly and efficiently cover your carburetor. Water proof and vibration 5/16"-18 Speed Nut is designed to lock onto cover with "O-Ring" seal, eliminating misplaced air cleaner fasteners.

KRC-1037: Dominator Assembly

KRC original aluminum carburetor cover kits quickly and efficiently cover your carburetor. Water proof and vibration 1/4"-20 Speed Nut is designed to lock onto cover with "O-Ring" seal, eliminating misplaced air cleaner fasteners.

KRC-1038: Gas Pedal Stop

Save your carburetor and throttle linkage from stress and strain. Mounted by pop rivets (not included) to the firewall makes it easy for one person to adjust the stop to throttle linkage from outside the car with screwdriver. 2-1/2" adjustment for the slickest safety piece on the market. Patent Pending.

KRC-1038L: Gas Pedal Stop - Stud Only

Replacement Stud for KRC-1038.

KRC-1040: Quick Disconnect Throttle Rod Kit

Quick disconnect throttle linkages include carb bushings for most carburetors. Heavy duty aluminum rods can withstand severe engine vibrations. Linkages can be removed from carburetor in 5 seconds. Patent #6338332 (Image not to scale.)

Click on picture for more information ** Quick Disconnect ends have very low breakaway friction points to reduce tire slippage during acceleration. Click on image for more.

KRC-1041: Disconnect Throttle Rod Kit (ARCA NASCAR Truck)

Quick disconnect throttle linkages include carb bushings for most carburetors. Heavy duty aluminum rods can withstand severe engine vibrations. Linkages can be removed from carburetor in 5 seconds. Works well on Crawford Air Box. Patent #6338332

KRC-1042: Throttle Ball Accessory

Throttle Ball Kit Includes: Throttle Ball, (3) carburetor spacers and locknut for carburetor side of KRC-1040.

KRC-1043: Throttle Ball Accessory

Throttle Ball Kit Includes: Throttle Ball, (3) carburetor spacers and locknut for carburetor side of KRC-1041. Small Ball.

KRC-1044: Quick Disconnect Ends

Quick disconnect throttle linkages include carb bushings for most carburetors. Heavy duty aluminum rods can withstand severe engine vibrations. Linkages can be removed from carburetor in 5 seconds. Works well on Crawford Air Box. Small ball.

KRC-1045: Carb Bushings

Set of three Aluminum carburetor bushings. Compatible with all KRC Throttle Linkages.

KRC-1046: Carb Spring Return Kit

Small Block & 90° V-8 Chevy, 2 or 4 Bolt

Achieve smoother, consistent throttle application with the KRC Return Kit. Attach spring to intake with mounting plate to eliminate rotating past center of throttle shaft. Compatible with KRC-1040.

KRC-1048: Carb Bracket Spring Return Kit for Ford

Fits 1" Carb Spacer.

Achieve smoother, consistent throttle application with the KRC Return Kit. Attach spring to intake with mounting plate to eliminate rotating past center of throttle shaft.

KRC-1049: Gas Pedal Ball

Gas Pedal Ball Includes: Gas Pedal Ball and locknut. Compatible with KRC-1040.

KRC-1051: Linkage Rod 22"

Replacement Rod for KRC-1040.

KRC-1051L: Linkage Rod 30"

Longer Throttle Rod for IMCA Stock Car Use. Replacement rod for KRC-1040.

KRC-4405: Single Pushlock Director

Anodized aluminum fuel directors incorporate a sliding nut, #8 AN, for quick installation and removal, 1/8" NPT port for fuel pressure gauge, and accommodate a 1/2" push lock hose. Used on two barrel carburetors and IMCA Sport Modifieds and B Modified Stock Cars.

Click on picture for more information

KRC-4408: Single Director -8AN

Anodized aluminum fuel directors incorporate a sliding nut, #8 AN,  for quick installation and removal, 1/8" NPT ports for fuel pressure gauge, and accommodate an -8AN fitting. Used on two barrel carburetors and IMCA Sport Modifieds, and B Modified stock cars. 

Click on picture for more information

KRC-4415: Dual Pushlock Director

Anodized aluminum fuel directors incorporate a sliding nut, #8 AN,  for quick installation and removal, 3/8" NPT ports for return line to tank and 1/8" NPT fuel return line to tank and 1/8" NPT pressure gauge outlet, and accommodate a 1/2" push lock hose.

Click on picture for more information

KRC-4418: Holley Dual Fuel Director -8AN

Anodized aluminum fuel directors incorporate a sliding nut for quick installation and removal, 3/8" NPT ports for 1/8" NPT fuel pressure gauge outlet, and accommodate an -8AN fitting. For Return links to tank.

Click on picture for more information

KRC-4419: Holley Fuel Director Fitting (Set of 2)

An 8AN to 7/8-20 Includes reusable .050 aluminum crush washer. Seals significantly better than steel banjo fitting. Fits most Holley carburetors and all KRC Fuel Directors.

KRC-4421: Demon Adapter Fitting (Set of 2)

Reusable .050 Aluminum Crush Washer. 9/16" to 8 AN for most Demon carburetor types.

KRC-4428: Demon Dual Fuel Director -8AN

Anodized aluminum fuel directors incorporate a sliding nut for quick installation and removal, 3/8" NPT ports for tank return line and 1/8" NPT fuel pressure gauge, and accommodate an -8AN fitting. 

Click on picture for more information

KRC-7203: Quick Disconnect Ends

Works as replacement throttle ends and automatic transmission linkage or any place you might want to use Quick Disconnecting fasteners. Replacement kit for KRC-1040.

Please reload