TOOLS & MISCELLANEOUS

KRC-1011: Inspection Tech Tray

This all aluminum tech tray is great for going through tech inspection. AN wrench, regular wrench, etc. can be secured to studs in the tray. This tray can be bolted on 1 stud of your hood pins. Tray has ample room to hold your carburetor, gauges, and shocks. It even has a welded spark plug tray for easy checking of cylinder conditions. They tray weighs just 2lbs. Bolt down or place tools in tray and head to tech! The tray makes things so easy when working on your motor. (Tools not included.) This tray can also be used for catching rear end oil or motor oil from your can in a pinch. Pan holds 8 quarts.

KRC-1021: 24# Lead Ballast Brick

Safety White Coated Lead Ballast Bricks will allow you to place weight anywhere on your chassis using our steel brackets with (2) predrilled 1/2" holes - 5 inches apart. (3x stronger than aluminum.) 

Compatible with Steel Brackets: (1 1/4") KRC-4192, (1 1/2") KRC-4194, (1 3/4") KRC-4196.

Click on picture for more information

KRC-1100: Lightning Gear Filler

Lightning Gear Filler will fill a rear end with 4-5 quarts, 90W Oil Fast! Lightweight, 7lb. tank can be filled with 60 PSI air pressure and controlled by manual valve. A 100 PSI liquid fill gauge and dipstick in the cap will help you pre-measure oil to speed up the rear end changing process. Fast, convenient, lightweight. Please read instructions for proper measurement.

KRC-1104: Filtered Oil Catch Tray

This Filtered Oil Catch Tray will filter your oil through the screen in the bottom. Designed to be used with our KRC-1100, Lightning Gear Filler.

KRC-1106: Hands Free Fill Kit

Kit includes: Plastic Male #8 Plug; #8 Cap, Female, Blue Anodized; 5/8 I.D. Hose to 1/8 Female; 3/4 Male to 1/8 Male.

KRC-1150: 50 Amp Power Block

Convenient battery charging and power, mount on rear deck or directly on firewall for timing light. Made from high impact resistant Lexan solid copper contacts. Barrel contacts readily accept all standard wire.

KRC-1151: 175 Amp Power Block

Convenient battery charging and power, mount on rear deck or directly on firewall for timing light. Made from high impact resistant Lexan solid copper contacts. Barrel contacts readily accept all standard wire.

KRC-1152: 350 Amp Power Block

Convenient battery charging and power, mount on rear deck or directly on firewall for timing light. Made from high impact resistant Lexan solid copper contacts. Barrel contacts readily accept all standard wire.

KRC-1201: Oil Filter Inspection Tool

Quickly and easily open filter canister to inspect for engine contaminants. Heavy duty 6061 anodized aluminum body razor sharp cutter wheel hardened to 60RC. Aviation adapters available. Inspection guide included to analyze your racing engine condition.

Click on picture for more information

KRC-1202: Aviation Adapter Kit

Oil filters are required to be cut open and inspected annually on all piston engines by the Federal Aviation Association.

Replacement Aviation Adapter Kit for Oil Filter Inspection Tool (KRC-1201 or KRC-1203)

KRC-1203: Aviation Oil Filter Inspection Tool

Quickly and easily open filter canister to inspect for engine contaminants. Heavy duty 6061 anodized aluminum body razor sharp cutter wheel hardened to 60RC. Inspection guide included to analyze your engine condition. Mandatory inspection by FAA, yearly, for piston aircraft.

Click on picture for more information

KRC-1204: Replacement Cutter Wheel

Replacement Cutter Wheel for KRC-1201 or KRC-1203.

KRC-1205: Wix Racing Adapter

For use with KRC-1203. This is an adapter for large racing, Wix filters. Also included, a heavy duty cutting wheel.

KRC-1206: OFC Replacement Kit

Complete automotive replacement hardware kit. Used on motorsports engines.

KRC-1312: Ford Small Block Piston Mandrel

.912 Mandrel to be used with our KRC-1335. Keyed for accurate placement every time.

KRC-1327: Chevy Small Block Piston Mandrel

.927 Mandrel to be used with our KRC-1335. Keyed for accurate placement every time.

KRC-1335: Piston Vice with Mandrel

Hold pistons securely at any angle up to 30°. One set up and remaining pistons are positioned precisely the same. Perfect for re-matching/balancing piston sets and fly cutting for high lift cams. Replaceable Piston Pin Mandrels are keyed to fit exactly the same way. Keyed for accurate placement every time.

KRC-1375: Ford 351M Mandrel

.975 Mandrel to be used with our KRC-1335 Mandrel Size. Keyed for accurate placement every time.

KRC-1384: Chrysler Small Block Mandrel

.984 Mandrel to be used with our KRC-1335. Keyed for accurate placement every time.

KRC-1389: Chevy Big Block Mandrel

.989 Mandrel to be used with our KRC-1335. Keyed for accurate placement every time.

KRC-4192: 1-1/14" Steel Bracket

Steel brackets (3x stronger than aluminum) attach through two holes already placed in our KRC-1021, Lead Ballast Brick, using 3" x 1/2" hex bolts.

Click on picture for more information

KRC-4194: 1-1/2" Steel Bracket

Steel brackets (3x stronger than aluminum) attach through two holes already placed in our KRC-1021, Lead Ballast Brick, using 3" x 1/2" hex bolts.

Click on picture for more information

KRC-4196: 1-3/4" Steel Bracket

Steel brackets (3x stronger than aluminum) attach through two holes already placed in our KRC-1021, Lead Ballast Brick, using 3" x 1/2" hex bolts.

Click on picture for more information

KRC-5000: Professional Cyclone Power Thru-Hole Ratchet (29 Piece Set)

  • The Thru-Hole ratchet can also use a 3/8" or 1/2" adapter to accommodate any standard socket

  • Accomplish 100% of the work with 1/3 of the sockets

  • Thru-Hole design virtually eliminates the need for deep hole sockets

  • More than just a gear head: pawl and gear tooth angles provide highest efficiency torque transfer

  • Double pawl positive Lock System that eliminates head slippage

  • Ratchet can use all sockets up to a SAE 7/8" (19mm)

  • Combo air ratchet with 3/8" & 1/2" drive

  • Short stroke ratcheting action for confined areas

  • Head socket assembly is 30% smaller than conventional air ratchets & sockets

  • Profile is 40% smaller-great for confined spaces

  • 85ft/lbs bolt busting torque

  • One hand operation on forward/reverse and socket release

  • Reduce slippage & increase speed with fully captured socket retention system

  • Rubber grip for superior comfort

Click on picture for more information

KRC-8219: Double 5/8"-11NC Stud/Thread Chaser

The KRC Stud/Chaser has a unique wide air gap. This air gap makes it easier for glue removal saving valuable time and can be glued for emergency pit stops. Normally used on Dirt car oval.

KRC-8220: Double 5/8"-18 NF Stud/Thread Chaser

The KRC Stud/Chaser has a unique wide air gap. This air gap makes it easier for glue removal saving valuable time and can be glued for emergency pit stops. Normally used on NASCAR series and Baja truck series.

KRC-8221: Emergency Single 5/8"-18 NF Stud/Thread Chaser

The KRC Stud/Thread Chaser has a unique wide air gap. This air gap makes it easier for glue removal saving valuable time and can be glued for emergency pit stops. For NASCAR and ARCA use.Nut in specification for pit stops in NASCAR.

KRC-8222: Wheel No/Go QC Gauge

Check stud holes in wheels to ensure safe and operable condition. 

KRC-8260: Rear Steer Car Loading Adaptor

Steer your race car from the rear to guide in your hauler easily while loading. Your quick disconnect and 10'x5/8" tubing is all that's required to complete this set up. (A tee handle works great.)

KRC-8310: Stud Knockout Tool

Remove Studs without damage. Long enough to protect skilled operator's hand while removing stud at track or shop.

KRC-8320: Wheel Brush Adapter

Easily remove rust or glue from wheels. Fits any wheel when mounted and attached to your brush.

KRC-8500: 15" Tire Stagger Dyno

Measures tire before mounting on rim.

KRC Patent #6681621

**Production of this product is back ordered  until January 2018, tentatively due to short supply for parts. Thank you for your patience.

KRC-8510: Balanced Air Inflation System with 40 PSI Pop Off Safety Valve

Safely inflate 1-4 racing tires up to approximately 40 PSI automatically, using compressed air. Hoses may be purchased separately. Patent Pending.

KRC-8512: Quick Connect Hose Kit

Includes (1) - 8 foot hose with quick connect and male quick couple

KRC-8840: 5" Coil Shock Nut Wrench

Easily make chassis adjustments without unloading springs and tearing up your coil over kit. Designed for use with KRC Coil Over Kits. This wrench also has 3/4" hex rim handle to loosen shock.

KRC-8842: 5" Coil Shock Body Wrench

Easily make chassis adjustments without unloading springs and tearing up your coil over kit. Designed for use with KRC Coil Over Kits. This wrench also has 3/4" hex rim handle to loosen shock.

KRC-8844: 3 1/2" Coil Shock Nut Wrench

3 1/2" Coil Over Spanner Wrench w/ 3/4" Hex for Shock Bolt. Works with KRC-8818 Pro Shocks. Eastern Pavement Modied Series. NASCAR Whelen Northern and Southern Modified Tour Series.

KRC-8846: 2" Shock Body Wrench

2" Shock Body Wrench (Fits on AFCO and any 2" body shock)

The 2" SBW is primarily used to hold the body of an AFCO Shock while rebuilding the shock. This wrench will not damage the tube while working or rebuilding any shock that has a 2" Diameter. Yellow plated for reuse. Socket head cap screws are loosened to put shock body into wrench. Do NOT over tighten. Tool weighs 3.25lbs. Made in USA.

Click on picture for more information

Please reload