TRANSMISSION & SUSPENSION

KRC-7100: Powerglide Lockup (Push Start)

Allows push-starting of cars equipped with Power Glide Transmissions. No more waiting until the starter cools down; push-start your car immediately. Includes flare fitting and bleeder valve. Requires single foot pedal, small master cylinder, #4 fitting and braided or steel brake line. Automatic Transmission. Push Start. Must have foot pedal/master cylinder to operate. Works great on hot engines that won't start. Engage foot pedal and push car to start.

KRC-7200: Powerglide Shifter

Lightweight, efficient and positive shift for your Powerglide tranny. Your choice of Red or Black anodized finish. Kluhsman Powerglide shifters include 20" shifter rods, heim and jam nuts, for complete installation.

KRC-7201: 8"-20" 3/8" Linkage Rod

Replacement linkage rod for single, 3 speed, Bert or Brinn Shifter

KRC-7202: 18"-30" 3/8" - 24 Linkage Rod

Replacement linkage rod for single, 3 speed, automatic transmissions.

KRC-7203: Throttle Linkage/Shifter Quick Coupler 3/8"-24 Female

KRC-7300: Dual Lever 3 Speed Shifter With Rods, Shifter Arm, Heims & Mounting Plate

Lightweight, efficient and positive shift for your tranny. KRC's 3 Speed shifters feature a lightweight aluminum dual handle designed for rough tracks and rough terrain conditions. 1/4" thick levers can be locked in with simple detent so it can't jump out of gear. They include 20" rods, shifter arm and heims for complete installation.

Click on picture for more information

KRC-7301: Three Speed Shifter Plate

Fits GM 3&4 Speed Transmissions

KRC-7400: Bert Transmission Shifter With Rods, Clevis Kit & Mounting Plate

Lightweight, efficient and positive shift for your tranny. KRC's Bert shifters feature a lightweight aluminum dual handle designed for rough tracks and rough terrain conditions. 1/4" thick levers can be locked in with simple detent so it can't jump out of gear. They include 20" rods, clevis kit & mounting bracket for complete installation. One lever is straight and taller, one lever is bent for ease of operator with the driver's gloves.

Click on picture for more information

KRC-7401: Brinn Transmission Shifter With Rods, Heims & Mounting Plate

Lightweight, efficient and positive shift for your tranny. KRC's Brinn shifters feature a lightweight aluminum dual handle designed for rough tracks and rough terrain conditions. 1/4" thick levers can be locked in with simple detent so it can't jump out of gear. They include 20" shifter rods, heims & mounting bracket for complete installation. One lever is straight and taller, one lever is bent for ease of operator with the driver's gloves.

Click on picture for more information

KRC-7402: Bert Transmission Clevis Kit Only - No Rods or Plates

Includes pins, fasteners and yoke. No rods or mounting plate.

KRC-8270: 4 3/8" x 1 1/18" Steering Column Bearing

Get comfortable in your car!

Yoke assembly for collapsible steering column. Fits 1 1/2" Cross bar fully adjustable for any size of driver. Fits collapsible column steering section. Comes with spacers to adjust your steering column just about anywhere.

KRC-8271: 4 3/8" x 3/4" Steering Column Bearing

Get comfortable in your car!

Yoke assembly for collapsible steering column. Fits 1 1/2" Cross bar in Late Model/Modified Stock Cars. This bearing will fit on an existing 3/4" steering column without cutting the steering shaft in half. This will fit over the Quick Disconnect steering wheel hex that is welded in. Comes with spacers to adjust your steering column just about anywhere.

KRC-8272: 6 1/4" x 1 1/8" Collapsible Bearing

Get comfortable in your car!

Yoke assembly for collapsible steering column. Fits 1 1/2" Cross bar fully adjustable for any size of driver. Fits collapsible column steering section. Comes with spacers to adjust your steering column just about anywhere.

KRC-8273: 6 1/4" x 3/4" Bearing

Get comfortable in your car!

Yoke assembly for collapsible steering column. Fits 1 1/2" Cross bar in Late Model/Modified Stock Cars. This bearing will fit on an existing 3/4" steering column without cutting the steering shaft in half. This will fit over the Quick Disconnect steering wheel hex that is welded in. Comes with spacers to adjust your steering column just about anywhere.

KRC-8274: 9 1/4"x 1 1/8" Collapsible Bearing

Get comfortable in your car!

Yoke assembly for collapsible steering column. Fits 1 1/2" Cross bar fully adjustable for any size of driver. Fits collapsible column steering section. Comes with spacers to adjust your steering column just about anywhere.

KRC-8275: 9 1/4" x 3/4" Bearing

Get comfortable in your car!

Yoke assembly for collapsible steering column. Fits 1 1/2" Cross bar in Late Model/Modified Stock Cars. This bearing will fit on an existing 3/4" steering column without cutting the steering shaft in half. This will fit over the Quick Disconnect steering wheel hex that is welded in. Comes with spacers to adjust your steering column just about anywhere.

KRC-8281: 1 1/8" Firewall Bearing

Replaces lower Heim bearing for collapsible steering column.

KRC-8282: 3/4" Firewall Bearing

Replaces lower Heim bearing for collapsible steering column.

KRC-8800: Lower Oval "A" Frame Bushing

Oval machined OEM Stock/Modified control arm bushings. Manufactured with wentzel bushing in side of Delrin Super Slick bushings. Fits '68-'72 Stock Chevelle Lowers. Only by KRC.

KRC-8800A: Delrin Bushing Only

Delrin replacement bushing. Replacement fits all KRC standard bushings.

KRC-8801: Lower Round "A" Frame Bushing Small

Small 1.400 Diameter

Machined OEM Stock/Modified control arm bushings. Manufactured with wentzel bushings inside of Delrin Super Slick bushings. Fits '68-'72 Chevelle GM A-body control arm. 

KRC-8802: Lower Round "A" Frame Bushing Large

Large 1.650 Diameter

Machined OEM Stock/Modified control arm bushings. Manufactured with wentzel bushings inside of Delrin Super Slick bushings. Fits '68-'72 Chevelle GM A-body control arm. 

KRC-8803: Stock 68-72 Chevelle Lower "A" Arm (Right)

IMCA Approved OEM Stock/Modified control arms. Laser scanned and built in ten station die to eliminate erratic handling and flexing of stock '68-'72 Chevelle GM control arm. Coined nose for more brake rotor clearance.

KRC-8804: Stock 68-72 Chevelle Lower "A" Arm (Left)

IMCA Approved OEM Stock/Modified control arms. Laser scanned and built in ten station die to eliminate erratic handling and flexing of stock '68-'72 Chevelle GM control arm. Coined nose for more brake rotor clearance.

KRC-8807: Lower Round "A" Bushing Metric (Small)

Small

Machined OEM Stock/Modified control arm bushings. Manufactured with wentzel bushings inside of Delrin Super Slick bushings. Fits78-88 GM Intermediate A-Frames and most stock metric A Frames, GM metric control arm. 

KRC-8808: Lower Round "A" Bushing Metric (Large)

Large

Machined OEM Stock/Modified control arm bushings. Manufactured with wentzel bushings inside of Delrin Super Slick bushings. Fits78-88 GM Intermediate A-Frames and most stock metric A Frames, GM metric control arm. 

KRC-8809: "A" Arm Replacement - Metric Kit (Small)

Fits KRC-8807

KRC-8810: "A" Arm Replacement Metric Kit (Large)

Fits KRC-8808

KRC-8819: 5" AFCO 19 Series

AFCO Coil Over Kit includes anodized aluminum components (top hat, bottom nut, 5" threaded sleeve and 2" extension sleeve.) KRC-8840, Shock Nut Wrench and KRC-8842, Body Wrench are designed to help fit all KRC Coil Over Kits and can be purchases separately. For A-Modified Stock cars and other applications.

KRC-8820: 5" Bilstein Coil Over Kit

Bilstein Coil Over Kit includes anodized aluminum components (top hat, bottom nut, 5" threaded sleeve and 2" extension sleeve.) KRC-8840, Shock Nut Wrench and KRC-8842, Body Wrench are designed to help fit all KRC Coil Over Kits and can be purchases separately. For A-Modified stock cars and other applications.

Click on picture for more information

KRC-8821: Bilsten Coil Shock Hat

Newly designed Coil Over Hat with spiral slot for easy installation. No pin required. Replacement hat for Bilstein Coil Over. Fits A-Modified stock cars.

KRC-8822: 5" AFCO Coil Over Kit

AFCO Coil Over Kit includes anodized aluminum components (top hat, bottom nut, 5" threaded sleeve and 2" extension sleeve.) KRC-8840, Shock Nut Wrench and KRC-8842, Body Wrench are designed to help fit all KRC Coil Over Kits and can be purchases separately. For A-Modified stock cars and other applications.

KRC-8823: AFCO Coil Shock Hat

Newly designed Coil Over Hat with spiral slot for easy installation. No pin required. Replacement Hat for AFCO coil over.

KRC-8824: 5" QA1 Coil Over Kit

Kits include anodized aluminum components (top, bottom nut, 5" threaded sleeve, and 2" extension sleeve.) Steel wrenches, KRC-8840 and KRC-8842, are designed for use with KRC coil-over kits. For A-Modified stock cars and other applications.

KRC-8824-50: 50 Series QA1 Coil Over Kit

QA1 Coil Over Kit includes anodized aluminum components (top hat, bottom nut, 5" threaded sleeve and 2" extension sleeve.) KRC-8840, Shock Nut Wrench and KRC-8842, Body Wrench are designed to help fit all KRC Coil Over Kits and can be purchases separately. For A-modified stock cars and other applications.

KRC-8824-51: 51 Series QA1 Coil Over Kit

QA1 Coil Over Kit includes anodized aluminum components (top hat, bottom nut, 5" threaded sleeve and 2" extension sleeve.) KRC-8840, Shock Nut Wrench and KRC-8842, Body Wrench are designed to help fit all KRC Coil Over Kits and can be purchases separately. For A-modified stock cars and other applications.

KRC-8825: QA1 Coil Shock Hat

Newly designed Coil Over Hat with spiral slot for easy installation. No pin required. Replacement Hat for QA1 coil over.

KRC-8826: 5" Pro Coil Over Kit

PRO Coil Over Kit includes anodized aluminum components (top hat, bottom nut, 5" threaded sleeve and 2" extension sleeve.) KRC-8840, Shock Nut Wrench and KRC-8842, Body Wrench are designed to help fit all KRC Coil Over Kits and can be purchases separately. For A-modified stock cars and other applications.

KRC-8827: Pro Coil Shock Hat

Newly designed Coil Over Hat with spiral slot for easy installation. No pin required. Replacement Hat for Pro coil over.

KRC-8828: 5" Carrera Dirt Coil Over

Kits include anodized aluminum components (top, bottom nut, 5" threaded sleeve, and 2" extension sleeve.) Steel wrenches, KRC-8840 and KRC-8842, are designed for use with KRC coil-over kits. For A-modified stock cars and other applications.

KRC-8830: 5" Penske Coil Over

Penske Coil Over Kit includes anodized aluminum components (top hat and nut.) KRC-8840, Shock Nut Wrench and KRC-8842, Body Wrench are designed to help fit all KRC Coil Over Kits and can be purchases separately. For A-modified stock cars and other applications.

KRC-8830: SM 5" Penske Smooth Body Shock

Penske Coil Over Kit includes anodized aluminum components (top hat, bottom nut, 5" threaded sleeve and 2" extension sleeve.) KRC-8840, Shock Nut Wrench and KRC-8842, Body Wrench are designed to help fit all KRC Coil Over Kits and can be purchases separately. For A-modified stock cars and other applications.

KRC-8830: TH 5" Penske Threaded Body Shock

Penske coil-over shock kits include anodized aluminum components (top, bottom nut, 5" threaded sleeve, and 2" extension sleeve.) Steel wrenches, KRC-8840 and KRC-8842, are designed for use with KRC coil-over kits. For A-modified stock cars and other applications.

KRC-8832: 5" Sleeve Bilstein-QA1-Penske

High visibility wrench slot to hold sleeve from turning during adjustment

KRC-8833: 5" Sleeve AFCO-Pro

High visibility wrench slot to hold sleeve from turning during adjustment

KRC-8834: 2" Sleeve Extender Bilstein-QA1-Penske

Extends threaded sleeve for longer springs.

KRC-8835: 2" Sleeve Extender AFCO-Pro

Extends threaded sleeve for longer springs.

KRC- 8836: Integra Coil Over Kit

5" Integra Coil Over Kit includes anodized aluminum components (top hat, bottom nut, and 5" threaded sleeve.) KRC-8840, Shock Nut Wrench and KRC-8842, Body Wrench are designed to help fit all KRC Coil Over Kits and can be purchases separately. For A-modified stock cars and other applications.

KRC-8837: 7" Bilstein-QA1-Penske

High visibility wrench slot to hold sleeve from turning during adjustment for longer springs. 

KRC-8838: 7" Sleeve AFCO-Pro

High visibility wrench slot to hold sleeve from turning during adjustment for longer springs.

KRC-8839: 2-1/2" Bilstein Coil Over Kit

Small Bilstein shocks.

Please reload